How To Open Original Ps4 To Clean It

Why are we making this guide? Sometimes when people wall mount their PS4 the dust shifts and causes the fan to run noisily. Nosotros've made this guide to help people maintain the health of their console, enjoy!

What you'll need:

• Tamperproof bit set (TR nine Torx security bit)
• Spiral driver
• Tin of air

Skip to:

• PS4 Slim
• PS4 Pro

Original PS4 Body:

This section is for the PS4 Chassis that was released in September of 2015. The older version of the console has guides upward everywhere. We decided to feature the newer PlayStation 4 model CUH-1200 in this guide. The console has a little chip unlike of an assembly so this guide will be helpful for those of you with the new build style.

Step 1. Remove the single spiral on the dorsum

There will be a single spiral underneath a shiny sticker at the center of the console, on the aforementioned 'layer' as the power port. Remove that sticker to reveal a 5-indicate star tamperproof screw. You're going to want to tamper with that bad boy; which will void your warranty (which if yous've congenital upwards plenty dust to need to clean your PS4, it is probably expired anyways.)

Step 2. Lift off the bottom comprehend

Take off the lesser embrace. This is tougher than information technology sounds! This console is really on there, the best way to practise it is pull upwards very hard on each side of the cover, well-nigh the dorsum of the console. You lot might have to experiment with where putting pressure makes information technology easiest to remove. You tin fissure the bottom plate doing this, and then be conscientious! It will come off without any damage when washed carefully.

Footstep 3. Remove the circled screws

Although it's tempting to just stop now that you lot tin run into the fan, don't. Yous're just a few screws abroad from getting admission to the heat sink. Unscrew the 2 Philips head screws on the metallic plate, and the three five-signal star tamperproof screws. This volition let y'all pull out the ability supply.

Pace 4. Remove the power supply

Sneak your fingers between the case and the power supply and pull out the power supply. Go along the power supply completely level while doing this to avoid yanking out the power supply cord. If you're careful there won't exist any issue removing it without ever having to unplug that supply cord.

Pace v. Cleaning

Now you have full access to the essential cooling elements of the PS4. Spray air through the fan blades, but also through the heat sink (metallic grate looking part) which was just exposed past removing the power supply. One time it'south all put dorsum together you should detect your PS4 running noticeably quieter.

PS4 Slim:

Step ane: Remove the peak cover

At that place are no screws so the encompass comes off fairly hands exposing the fan right away. Yous could just end hither, which is great for a quick cleaning but, later a while y'all're only blowing more dust into the console. We kept going.

Step 2: Unscrew all of these

In that location are a lot of screws here. Once you remove all the screws circled in the image above you will exist able to elevator up the metal cover giving you boosted admission to remove dust caught up in the rut sink.

Step 3 Tilt up the interior cover

It won't exist possible to completely remove the interior encompass without further disassembly. All you volition exist able to do at this signal is tilt this interior summit cover upwardly for better cleaning admission, non completely remove the embrace.

Pace four Cleaning

With this access, take a microfiber material or can of air and deep clean the console's cooling organization. Be very careful with the exposed parts. Make sure nothing falls into the area protected by the embrace, equally you move the system there is enough space for devious objects (say a modest screw) to shift causing damage to your PS4. So what nosotros're trying to say is we would not recommend eating Cheetos while doing this. Once you've put everything back together you should detect the PS4 fan running quite a bit quieter.

PS4 Pro:

Step ane Remove the top encompass

This elevation embrace is designed to be removed, simply it is not easy. You lot may accept to experiment with where putting force per unit area about easily allows yous pull it off.

Step ii Cleaning

That's it! You have better access to the fan in this build than the ps4 slim. The heat sink runs parallel to the fan in a different style than the other models and requires a decent amount of disassembly to admission.  If you want to deep clean down to the heat sink you're going to take to pause downward nearly the entire panel, this guide would be more suited to your needs.

PlayStation has thankfully improved the ease of cleaning with the newer models. Nosotros hope this guide helps you maintain your console ensuring it lives a long happy life!

Source: https://hideitmounts.com/blogs/blog/how-to-clean-out-your-ps4-pro-slim

Posted by: cameroncatcher.blogspot.com

Share this post